I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rod Building
Posted by: wayne feener (---.eastlink.ca)
Date: December 03, 2011 04:22PM

Does anyone know if Andy Dear ever reproduced the Dale Clemens VHS tapes on rod building that he obtained the rights from 3M back in 2006.
I would like to get a copy of the tape on Building your own rod (100 min.) and Creative rod crafting (110 min.). I had viewed them years ago and built some fly rods. They are excellent tapes and very informative.

Options: ReplyQuote
Re: Rod Building
Posted by: Tom Kirkman (Moderator)
Date: December 03, 2011 04:23PM

He did not. Scott Parsons owns the rights to those tapes now.

................

Options: ReplyQuote
Re: Rod Building
Posted by: wayne feener (---.eastlink.ca)
Date: December 03, 2011 04:33PM

Do you know if he has any plans for them.

Options: ReplyQuote
Re: Rod Building
Posted by: Tom Kirkman (Moderator)
Date: December 03, 2011 04:37PM

Sorry, unable to advise. Best check with Scott at Roddancer.

...............

Options: ReplyQuote
Re: Rod Building
Posted by: kevin knox (---.baybroadband.net)
Date: December 04, 2011 07:44AM

Wayne, check youtube.

Kevin

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster