SPONSORS
2024 ICRBE EXPO |
34 mm reel seats needed.
Posted by:
Scott Bolter
(---.sub-75-244-176.myvzw.com)
Date: November 27, 2011 05:00PM
Aloha,
Does anyone know where I can get my hands on some 34 mm reel seats? I have the Fuji plate style reel seats I was considering using, but would like to see if there are any larger traditional reel seats before I continue these builds. They are sabers from the 80's I have a 32mm seat I tried and I'd have to ream out the inside a bit to make it fit, but then there's o room for the adhesive. I was hoping for something with the inlaid wood, but can't find anything and at this point, I won't be too picky... Thanks for any help! Aoha, Scott And if anyone has any suggestions on a better reel seat for these older ulua/surf rods, please chime in. Re: 34 mm reel seats needed.
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: November 27, 2011 06:54PM
If you are going Conv reel you can search for Coasters to hold your reel Re: 34 mm reel seats needed.
Posted by:
Scott Bolter
(---.sub-75-244-177.myvzw.com)
Date: November 27, 2011 07:00PM
Coasters?? Re: 34 mm reel seats needed.
Posted by:
Scott Bolter
(---.sub-75-244-44.myvzw.com)
Date: November 27, 2011 08:47PM
If there's no 34 mm reel seats, what's the biggest plate style reel seat and from who? Re: 34 mm reel seats needed.
Posted by:
Donald Becker
(---.169.popsite.net)
Date: November 27, 2011 09:01PM
Hi Scott,
Merrick Tackle should have 34 mm reel seat available from Benchmark. The largest coasters are about 33mm and I do not believe they would be adequate to support a 4/0 or 6/0 reel. Don Don Becker Sorry, only registered users may post in this forum.
|