SPONSORS
2024 ICRBE EXPO |
Does any one make ??
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 18, 2011 05:30PM
Does any one make eva blocks at 1 1/4 by 1 1/4" other then the 2" by 2" that are offered
Billy ??? There is some much wast on the 2" blocks and most handles are - what 1 - 1 1/4" in OD Unless you are 7' tall and need a almost 2" OD handle ??? I did a handle from a 2 by 2 and when it got round it was about 1 3/4" OD And most are 1 - 1 1/8" OD Bill - willierods.com Re: Does any one make ??
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: November 18, 2011 05:35PM
Do a Google Search and see what you can find. Re: Does any one make ??
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 18, 2011 05:50PM
I usually do that But I thought some here so i could -- Support this sit - would know
Then again can the dust be glued to make some thing ?? My mommy always told me -- wast - not - want - not I do see Exotic Cork blocks that are 1 1/4 by same -- Less wast And of course I thought of Billy Bill - willierods.com Edited 2 time(s). Last edit at 11/18/2011 05:59PM by bill boettcher. Re: Does any one make ??
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: November 18, 2011 08:15PM
I can make the blocks whatever size you want them to be. 1.25 x 1.25 is too small, when you bore it and turn it it'll be a little off, teh grips will end up about 1 1/8" OD f you're lucky. I always start my grip work 1.5 x 1.5" because it's quicker to turn down.
I also have unbored cork blocks 1.5 x .1.5 x 12" in Natural & Chocolate brown Sorry, only registered users may post in this forum.
|