SPONSORS
2024 ICRBE EXPO |
Working with Anglers Resource/Fuji Guide Placement Software
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: November 09, 2011 10:59AM
We refer to GPS as a "starting point" on our website, but exactly what that means is open to interpretation. The idea is to work "with" the information to reach a final layout. How? We developed a GPS layout for a rod a few days ago and took notes as we progressed. The resulting "scenario" is now posted as a blog entry at [www.anglersresource.net] Click "Blog" at the bottom of the left sidebar. Thanks to all for the positive feedback so far. Re: Working with Anglers Resource/Fuji Guide Placement Software
Posted by:
Todd Theodore
(---.fuse.net)
Date: November 12, 2011 07:13AM
I'm confused about the line drawn on the piece of paper that represents the blank. You then do all your measurements and calculations from/to that point. But, the reel will be in a reel seat, not flat on the blank. I would think that small bit of space would be important in getting the optimum measurements. Does this make any sense? Re: Working with Anglers Resource/Fuji Guide Placement Software
Posted by:
Tom Kirkman
(Moderator)
Date: November 15, 2011 03:44PM
Yes it does and Jim and I discussed this when they were setting it up. I can't remember if they chose an average seat height or not. You'd have to contact Jim and ask. But yes, it would make a small difference if you're working directly with spool upsweep angle.
............. Sorry, only registered users may post in this forum.
|