SPONSORS
2024 ICRBE EXPO |
Size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 29, 2011 11:14AM
Does any one have the OD size of the Okuma Avenger A 40 series spool face size
Thanks Bill - willierods.com Edited 1 time(s). Last edit at 08/29/2011 11:15AM by bill boettcher. Re: Size
Posted by:
Robert Marie
(---.hsd1.ma.comcast.net)
Date: August 29, 2011 01:42PM
Hi Bill,
Just saying what I would suggest : Take out your digital caliper for a ride (or any like accurate tool and go on the road). ie. I would go get my own measurements from any local available and cooperative seller to make results 'cover' other similar models of that brand, etc. I have not had to do this too many times (these measurements are re-usable IMHOP). I have been using a rod building spreadsheet [MS Office 2007 EXCEL] which includes a subdivision for a choice of spinning reels. In any case good luck; sir Bob Marie Re: Size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 29, 2011 05:12PM
Heck all I was asking if some one has one of these reels and could give me the measurement
No one has one ?? Bill - willierods.com Edited 1 time(s). Last edit at 08/30/2011 10:42AM by bill boettcher. Re: Size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 30, 2011 04:31PM
So I guess no one has any of these that they could measure for me Bill - willierods.com Re: Size
Posted by:
Scott Brown
(---.sub-75-201-149.myvzw.com)
Date: August 30, 2011 04:47PM
Bill, I do not have one and spent close to an hour yesterday looking online. Could not come up with anything other than the spool capacity. I did see someone in another forum say the reel size was the spool diameter in mm but I would not bet on that. Wish i could help. Re: Size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 30, 2011 04:55PM
Thanks a lot Scott for the time
i guess if I call some of the fishing store around me - maybe I can get some one to measure one Unless some of the suppliers on the left sell any ??? Bill - willierods.com Re: Size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 31, 2011 08:12AM
Steven
I did no spool face size Bill - willierods.com Sorry, only registered users may post in this forum.
|