I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

looking for a builder
Posted by: Rob Culver (---.stny.res.rr.com)
Date: August 09, 2011 10:30PM

hello I have built a few rodw in the past but time is getting away from me now and I have a 7 ft 6 forcast 2 piece fly rod blank that I would like to get togather. I have some of the fixings i.e. reel seat cork rings for the handle.the builder would need to supply the guides and bushings for the reel seat ect. if your interested email me at emerger35@yahoo.com with a price for the work. im not looking for fancy wraps or anything like that just a well put togather rod....

Options: ReplyQuote
Re: looking for a builder
Posted by: Tom Kirkman (Moderator)
Date: August 10, 2011 07:46AM

www.tackleworks.org

............

Options: ReplyQuote
Re: looking for a builder
Posted by: David Dosser (---.columbus.res.rr.com)
Date: August 10, 2011 11:54AM

Rob, you need to find someone in your area. You won't find a lot of guys on here competing to build that rod. If it were me, I would look for a builder in my city or close to me and give him a call. That way there would be no shipping issues and you might even make a good friend. Just a suggestion.

David Dosser
Coshocton, OH

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster