SPONSORS
2024 ICRBE EXPO |
roller tip on a jigging rod
Posted by:
David Teague
(---.hsd1.fl.comcast.net)
Date: August 03, 2011 10:38PM
Hello everyone, I have a customer who wants the aftco casting ring roller tip on a seeker hurcules to be used for jigging....i can't really see any reason for this setup...am i missing something?
Dave Re: roller tip on a jigging rod
Posted by:
kevin knox
(---.baybroadband.net)
Date: August 03, 2011 11:12PM
nope Re: roller tip on a jigging rod
Posted by:
Col Chaseling
(---.lns14.ken.bigpond.net.au)
Date: August 04, 2011 01:26AM
Hi David,
Your not but the customer might be. You''ll probably get to replace a tip in a couple of months. Ask him why he wants a roller tip on a jigging rod and explain the down side. ESFNEM Col Port Kembla, NSW Australia Re: roller tip on a jigging rod
Posted by:
David Teague
(---.hsd1.fl.comcast.net)
Date: August 04, 2011 11:56AM
i already told him that the movement of the rod tip during jigging there could be a possibility that the line could get fouled up,along with other disadvantages such as being heavy etc. he doesn't seem to budge an inch in his thinking...so i thought maybe i was missing a specfic application that im not familiar with
Dave Re: roller tip on a jigging rod
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: August 04, 2011 12:37PM
No, I don't think you're missing anything. Roller tip for this is not the best solution - a good ceramic is. Re: roller tip on a jigging rod
Posted by:
Col Chaseling
(---.lns14.ken.bigpond.net.au)
Date: August 04, 2011 07:09PM
David, maybe you should suggest to him that he go the whole hog and get a fully rollered jigging rod. It'd certainly be different.
ESFNEM Col Port Kembla, NSW Australia Re: roller tip on a jigging rod
Posted by:
Phil Richmond
(---.pr.navy.mil)
Date: August 05, 2011 01:56AM
On the flip side, must be a reason that he is asking for that. I'd talk about it with him then give him what he wants. Never know, he may be happier than a pig in the mud with it. Sorry, only registered users may post in this forum.
|