SPONSORS
2024 ICRBE EXPO |
minima 3 spinning guides
Posted by:
Don Slater
(---.neo.res.rr.com)
Date: July 25, 2011 09:57AM
I've not used or even seen minima spinning guides. Does anyone know the
minima equivalent of standard guides? standard - minima 30...... 25...... 20...... 16...... 12...... 10...... 8....... 7....... 6....... Thanks, Don Re: minima 3 spinning guides
Posted by:
Tom Kirkman
(Moderator)
Date: July 25, 2011 10:28AM
If you're talking about ring ID, the Minima rings are about .5 to 1mm less in actual ID than their named size.
............. Re: minima 3 spinning guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 25, 2011 10:57AM
Tom
I thought they were larger then ceramics because of the thinner ring ?? [www.mudhole.com] Bill - willierods.com Edited 1 time(s). Last edit at 07/25/2011 10:58AM by bill boettcher. Re: minima 3 spinning guides
Posted by:
Tom Kirkman
(Moderator)
Date: July 25, 2011 12:50PM
That's what I said - the inside ID is only .5 to 1mm smaller than the size listed. Ceramics are generally about 2 to 3mm smaller in ID than the size listed.
......... Re: minima 3 spinning guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 25, 2011 01:52PM
My bad Sorry Bill - willierods.com Sorry, only registered users may post in this forum.
|