SPONSORS
2024 ICRBE EXPO |
MHX blanks - are they matte or gloss?
Posted by:
Dale Holmes
(---.lns4.bat.bigpond.net.au)
Date: July 12, 2011 09:12AM
Hi all,
I would just like to know if the mudhole MHX blanks are a matte or gloss finish - it is bit hard to tell from the photos on their website. It only mentions that the colour is slate grey. Thanks Dale Hobart, Tasmania, AUS Re: MHX blanks - are they matte or gloss?
Posted by:
Lou Auret
(204.16.161.---)
Date: July 12, 2011 09:38AM
Matte. If you want more shine: as last step in build finish off with a carnuba car wax or similar polish. Re: MHX blanks - are they matte or gloss?
Posted by:
matthew jacobs
(---.122.31.71.static.ip.windstream.net)
Date: July 12, 2011 09:45AM
The finish is pretty well "naked graphite" or a matte finish. Except the light saltwater line, those have a gloss finish. Re: MHX blanks - are they matte or gloss?
Posted by:
BobMcKamey
(---.se.biz.rr.com)
Date: July 12, 2011 09:45AM
Standard MHX blanks are a matte slate grey finish, with the exception of the Lt Saltwater series and they have a clear gloss finish over the grey. Our Hi-Mod MHX blanks have a "naked" graphite finish. Bob McKamey bobm@mudhole.com Re: MHX blanks - are they matte or gloss?
Posted by:
mike harris
(---.cluster-h.websense.net)
Date: July 12, 2011 09:48AM
They have at least 3 different finishes. The standard MHX blanks have a matte clear coat. The new high modulus blanks have a bare graphite finish. The light saltwater versions have a gloss clear coat. Re: MHX blanks - are they matte or gloss?
Posted by:
Russell Brunt
(---.hsd1.fl.comcast.net)
Date: July 13, 2011 05:22PM
Might be the wrong place to ask but I have heard of "buffing" with kraft paper to polish or create a luster. Can anyone comment or what that ends up looking like and how hard or effective it is to carry out? Russ in Hollywood, FL. Re: MHX blanks - are they matte or gloss?
Posted by:
Todd Kreikamp
(---.hsd1.va.comcast.net)
Date: July 14, 2011 09:11AM
The light saltwater's have a gloss to them, except the L902 which is a matte/clear. Re: MHX blanks - are they matte or gloss?
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: July 14, 2011 01:06PM
Russ,
on a polished surface you can take a courser grade of paper (like one that comes off of an inexpensive note pad) and cut into strips and then buff on your power wrapper. Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Re: MHX blanks - are they matte or gloss?
Posted by:
Chuck Mills
(---.grenergy.com)
Date: July 15, 2011 09:00AM
I like the naked graphite look. I have Lami XMGs and NFC (and blanks I have stripped). I put a coat of Meguires carnuba wax on after building and they have a nice sheen. Not glossy, but not matte. The plus for me is that there is no finish to scratch.
Chuck _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Sorry, only registered users may post in this forum.
|