SPONSORS
2024 ICRBE EXPO |
Diameter of the rod?
Posted by:
Jason Barnette
(---.mobile.mymmode.com)
Date: June 10, 2011 04:03PM
I'm starting to order all of stuff I need to build my first rod and I can't seem to find the diameter of the blank to match the correct parts. I'm ordering some EVA grips but I don't know which size to get because I don't know the diameter. How do I find which size I need?
Thanks, Jason Re: Diameter of the rod?
Posted by:
William (Bill) Jones
(---.pool.starband.net)
Date: June 10, 2011 04:09PM
Most all the sponsors will, if asked, will make sure the size of the components will match the blank you are ordering.
Bill Re: Diameter of the rod?
Posted by:
Jason Barnette
(---.mobile.mymmode.com)
Date: June 10, 2011 04:12PM
Oh ok. So if I order all of the stuff from Mudhole they will know what size I need even if I pick the wrong size? Winding check, grips ect? Re: Diameter of the rod?
Posted by:
Ellis Mendiola
(---.hsd1.tx.comcast.net)
Date: June 10, 2011 05:09PM
You best tell them that the parts are for that blank. Re: Diameter of the rod?
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: June 10, 2011 05:25PM
It is not a guarantee.
But if you ask them to size the parts including tip/top to that blank, most of the sponsors are more then happy to do so Re: Diameter of the rod?
Posted by:
William (Bill) Jones
(---.pool.starband.net)
Date: June 10, 2011 05:58PM
Use the telephone! Give them a call & describe what you are trying to achieve and they will help. Even better, consider one of the "kit" rods. All the components will be pre-selected to fit. You will be amazed at the end product of their parts & your craftsmanship. Re: Diameter of the rod?
Posted by:
Jason Barnette
(---.lightspeed.austtx.sbcglobal.net)
Date: June 10, 2011 08:00PM
Thanks for the help guys! I went ahead ordered a MHX casting rod kit since this is my first build. Cant wait to start to building it......... Re: Diameter of the rod?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: June 10, 2011 09:44PM
Jason,
Good idea. A kit will have all correctly sized components. Roger Sorry, only registered users may post in this forum.
|