SPONSORS
2024 ICRBE EXPO |
Madeira thread spools
Posted by:
Shea McPherson
(---.sub-75-246-125.myvzw.com)
Date: May 15, 2011 06:22PM
What is the easiest method for changing the thread off of the Madeira spools onto more conventional spools? Have gone by the local sewing shops and they aren't as helpful as I would have hoped. I like the smaller thread spools on my PB wrapper.
Thanks, Shea Re: Madeira thread spools
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: May 15, 2011 06:26PM
If it is a power wrapper mount the spool on a dowel and allow the thread to come off the top of the Madeira spool (not rotating) Freddwhy (Rapt-Ryte) Re: Madeira thread spools
Posted by:
Shea McPherson
(---.sub-75-246-125.myvzw.com)
Date: May 15, 2011 07:51PM
How would I then put tension on the thread? The wrapper is the Pac Bay power wrapper. The threaded rod isn't long enough to hold the Madeira spool. I like the idea, just wish i didn't have to modify my carriage to make it work. BTW, what ever happened to Gudebrod? I haven't needed thread in quite a while, and no longer see it at all.
Thanks, Shea Re: Madeira thread spools
Posted by:
Mike Winkler
(---.new.res.rr.com)
Date: May 15, 2011 09:49PM
Mount the new spool on a dowel. Chuck it on to your wrapper. Transfer it yourself. Re: Madeira thread spools
Posted by:
Adam Edwards
(203.15.208.---)
Date: May 16, 2011 02:04AM
As Mike said or use a hand drill. Put a bolt through the new spool, tighten nut on other end and away you go. Put the maderia spool over dowel or the like. Edited 1 time(s). Last edit at 05/16/2011 02:04AM by Adam Edwards. Sorry, only registered users may post in this forum.
|