SPONSORS
2024 ICRBE EXPO |
Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: May 08, 2011 11:42AM
Anyone have an American Tackle GBRLS-12 (or any size 12 Typhoon) on hand? I need the distance from blank to bottom of ring.
Thanks!!! Chuck _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: May 09, 2011 07:16AM
Blank to bottom of ring: 10.28mm // blank to top of ring 21.84mm (those are the opening measurements / not frame) Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Chuck Mills
(---.grenergy.com)
Date: May 09, 2011 01:07PM
Thank you Ken!!!! I really appreciate the time you took. I was shipped the wrong guide with the right label. Mine measures 6.5mm to the inside bottom of the ring.
Chuck _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Edited 1 time(s). Last edit at 05/09/2011 01:17PM by Chuck Mills. Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: May 09, 2011 01:34PM
Chuck -
That's a size 10. Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Chuck Mills
(---.grenergy.com)
Date: May 09, 2011 01:45PM
Got it.
Thanks again! _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 10, 2011 08:54AM
call the supplier and they Should ship you another ?? With out charging for shipping Bill - willierods.com Edited 1 time(s). Last edit at 05/10/2011 08:55AM by bill boettcher. Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Chuck Mills
(---.grenergy.com)
Date: May 10, 2011 01:58PM
Yes, Bill, they took care of me just fine. I was not familiar with that series and ordered one spinning guide in my last order. When it came it measured shorter than the casting guides so that threw me for a loop. Right label on package, but wrong guide. _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 11, 2011 09:23AM
I generally order extras just to be sure. Now I have a lot of stock that when I need one I have it Bill - willierods.com Re: Need a measurement on AT Ring Lock Typhoon Guide
Posted by:
Chuck Mills
(---.grenergy.com)
Date: May 11, 2011 09:53AM
Me too. I had a dozen, but needed one a bit taller. _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Sorry, only registered users may post in this forum.
|