I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Chuck advice please
Posted by: Ray Mazza (---.syrcny.east.verizon.net)
Date: March 17, 2011 07:24PM

Just bought a new Jet 1014 and I plan to buy a 3 or 4 jaw chuck. I'm looking for some suggestions. Thanks in advance.
Ray

Options: ReplyQuote
Re: Chuck advice please
Posted by: Tom Kirkman (Moderator)
Date: March 17, 2011 07:30PM

I use a OneWay Talon chuck and wouldn't trade it for anything, but there are many good ones out there, some costing considerably less.

............

Options: ReplyQuote
Re: Chuck advice please
Posted by: Robert Metzger (---.dyn.optonline.net)
Date: March 17, 2011 07:44PM

Check out Penn Stat Industries. Over the years I have
found them To offer good quality at reasonable cost.

Options: ReplyQuote
Re: Chuck advice please
Posted by: wayne diduch (---.cpe.net.cable.rogers.com)
Date: March 17, 2011 07:52PM

Ray, I'm with Tom on this one...i too, own a Oneway Talon... outstanding !!

Options: ReplyQuote
Re: Chuck advice please
Posted by: Jim Gamble (97.106.17.---)
Date: March 17, 2011 08:46PM

The Nova G3 is a good choice for midi lathes.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster