SPONSORS
2024 ICRBE EXPO |
Varigated Swirl EVA - shaped, sanded, bored, blocks
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: March 02, 2011 09:28AM
I would first like ot thank everyone who came by & had some laughs and learned something at The NERBs booth this past weekend. I had a blast turning all those square blocks round in front of a crowd, trying to see who I could hit with teh scraps, as they flew off teh lathe, lol > there were pieces that flew over teh back of the booth into teh booth behind us - haha!!
I have updated my site: [northeastrodbuilders.com] so that anyone without a lathe that is interested in the Vari Swirl grips can put a set on their rod. I will make them whatever length and shape you want. If you want one of the other colors bored, or shaped and sanded that is not a problem either, just let me know. Re: Varigated Swirl EVA - shaped, sanded, bored, blocks
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: March 02, 2011 10:08AM
I just uploaded pics of grips which I turned down at teh NERBs booth this past weekend. [www.rodbuilding.org] Everyone found it funny that I tried making a Bishop chess piece. Edited 1 time(s). Last edit at 03/02/2011 10:09AM by Billy Vivona. Re: Varigated Swirl EVA - shaped, sanded, bored, blocks
Posted by:
Andrew Metzger
(---.afspc.af.mil)
Date: March 02, 2011 10:51AM
Hey Billy, put a hold on my email to ya until I can get home and see these pics of the turned down grips. Re: Varigated Swirl EVA - shaped, sanded, bored, blocks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 02, 2011 03:29PM
Billy
You selling colored eva strips ?? Bill - willierods.com Sorry, only registered users may post in this forum.
|