SPONSORS
2024 ICRBE EXPO |
John Deere Green
Posted by:
Garey Elkins
(58.185.209.---)
Date: December 28, 2010 05:27AM
I am wanting to do a John Deere themed rod on the green CRB green blank. Any suggestions for a thread color? I was thinking of using the ProWrap neon yellow/sage/black. Will it be too loud or do y'all have any other suggestions for the colors? Re: John Deere Green
Posted by:
Tom Kirkman
(Moderator)
Date: December 28, 2010 11:15AM
In order to get the "paint" look, I'd almost surely use an NCP for both the yellow and the green.
................. Re: John Deere Green
Posted by:
Mike Doran
(---.dsl.hstntx.sbcglobal.net)
Date: December 28, 2010 07:54PM
I just completed a John Deere theme, althought it was on a matte gray blank. (Last coat of finish turning as I type.) I used ProWrap 519 for the green and I think
Prowrap 101 for the yellow. On my blank it came out extremely close to John Deere. I would do a couple of test wraps with finish to see how the green blank effects the thread color. Sorry, only registered users may post in this forum.
|