SPONSORS
2024 ICRBE EXPO |
Monthly special www.okierodbuildingtools.com
Posted by:
mike eslick
(---.lightspeed.tulsok.sbcglobal.net)
Date: December 21, 2010 12:04PM
hey rod builders
I currently have a monthly special on my aluminum wrapper and 3 rod dryer and epoxy mixer all shipped for $300.00 6 foot aluminum rod wrapper with 2 rod supports (info on upgrading to 8 foot and longer and rod supports on webpage) 3 rod dryer (your choice of RPM 6, 9 or 18 and even 28) 28 rpm epoxy mixer with mixing cups and ball bearing all shipped 1st week of January CLICK ON THE MONTHLY SPECIAL ON THE LEFT WWW.okierodbuildingtools.com I have rod dryers, epoxy mixers etc on my website with FREE SHIPPING Check me out and shoot me a email if you have any questions info@okierodbuildingtools.com I will be adding a 3-1/4" 3 jaw chuck and head stock and pulley that is used on the TAIG micro lathe It will be an additional upgrade to my current aluminum wrapper. Re: Monthly special www.okierodbuildingtools.com
Posted by:
Tom Kirkman
(Moderator)
Date: December 21, 2010 12:06PM
Mike sent me some of his tools a few weeks back. Very lightweight. If you travel and need a wrapper or dryer to carry with you, his tools would be highly recommended.
........... Re: Monthly special www.okierodbuildingtools.com
Posted by:
Tony Wilson
(---.cinci.res.rr.com)
Date: December 21, 2010 10:04PM
I have been looking at the 6ft or 8ft aluminum rod wrapper for a few weeks now. Hoping Santa brings some spending money this week! Re: Monthly special www.okierodbuildingtools.com
Posted by:
Jeremy Wagner
(---.dhcp.embarqhsd.net)
Date: December 24, 2010 03:01PM
I just received one of Mike's 3 rod dryers for an early Christmas present. It's very nice and will get lots of use over the winter!
jeremy Sorry, only registered users may post in this forum.
|