SPONSORS
2024 ICRBE EXPO |
Wrapping guides with Holographic Thread....?
Posted by:
Jeff Davis
(---.jax.bellsouth.net)
Date: December 09, 2010 01:08PM
I have some holographic guides I want to use on a build and am wondering a couple of things.
#1: How does metalic thread hold up as guide wraps? #2: Does anyone on the left carry size "A" holographic thread? I'd like to use the holographic thread if I can find it in size "A", but only found it in size "D", which is too big for this light action inshore rod. Thanks for any help or suggestions. Jeff Re: Wrapping guides with Holographic Thread....?
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 09, 2010 03:33PM
I often use metallic thread on guides with no problem (actually it's stronger than nylon) Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Wrapping guides with Holographic Thread....?
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: December 09, 2010 07:07PM
I too use the metallics and have never had an issue with it. I build smaller rods, all inshore.
Bill Ohio Rod Builders Canton, Ohio Re: Wrapping guides with Holographic Thread....?
Posted by:
Col Chaseling
(---.lns14.cht.bigpond.net.au)
Date: December 09, 2010 07:36PM
Hi Jeff,
As far as I know holographic thread is flat. The Glisten Gloss that I've got is about 5 times wider than "A" thread and less than 1/2 as thick. I wouldn't recommend it for guide wraps due to the number of wraps you'd get on a guide foot and you can't put a lot of tension on it as it destroys the holographic effect. I just use it for trim or highlights. Some of the multi coloured metallics may give you the effect you want and as Mike said it's definitely strong enough. ESFNEM Col Re: Wrapping guides with Holographic Thread....?
Posted by:
Jeff Davis
(---.jax.bellsouth.net)
Date: December 10, 2010 12:22AM
Thanks all. Sorry, only registered users may post in this forum.
|