SPONSORS
2024 ICRBE EXPO |
Uncured finish
Posted by:
Kevin Bergeron
(---.static.networktel.net)
Date: July 27, 2010 03:35PM
I recently put finish on a newly completed buttwrap, and I always keep the unused leftover finish to check to make sure everything turns out alright. I glad I did because the finish has not set up completely yet and is still a little tacky after 48 hours. I must have mixed a little too much of one of the compounds. Can I just cover with a fresh batch of good finish and everything be alright for the life of the rod. Re: Uncured finish
Posted by:
Tom Kirkman
(Moderator)
Date: July 27, 2010 03:38PM
Yes, provided you carefully measure and mix the new batch.
............. Re: Uncured finish
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 27, 2010 04:15PM
How did you measure out the finish. I have been using syringes for years and have never had a problem. - Did you mix long enough ?? Bill - willierods.com Re: Uncured finish
Posted by:
Kevin Bergeron
(---.static.networktel.net)
Date: July 27, 2010 04:27PM
I use the syringes since I started, but this was a long wrap so I use 3cc and then refilled another 2cc. I have a feeling I forgot to put the extra 2cc of one the elements. I have use the same 3cc syringes for the last year and never had a problem. The new batch of finish cured and leveled out nicely, I was curious if I would have any problems with the first application. Thanks for your timely responses. Re: Uncured finish
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 28, 2010 07:51AM
Should not be a problem at all. The second coat will mix with the first coat and be like one hard coat. Bill - willierods.com Sorry, only registered users may post in this forum.
|