SPONSORS
2024 ICRBE EXPO |
Guide and Top Assortment Recommendation?
Posted by:
Bert Nagy
(---.asm.bellsouth.net)
Date: July 18, 2010 03:39PM
I have recently gotten a few requests to repair rods for things like broken guides and tip tops that have rings popped out.. I have not really marketed any service, - this has been from bass club buddies, etc: There have not been a lot of requests, but enough to get me to thinking about taking it to the next level.
I was wondering if anyone who is more experienced in the repair side could provide a recommendation for an assortment of tip tops, and guides to carry on hand? I have been building rods for about 3 years, and have used mostly Fuji Alconites, and Batson micros. I am not real knowledgeable of other brands. Around this area, are mostly bass and crappie fisherman. Don't see a lot of saltwater. Any thoughts or suggestions would be appreciated. Sincerely Bert Nagy Re: Guide and Top Assortment Recommendation?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 18, 2010 04:49PM
When you get an order to fix a rod, do not just order one guide- order maybe 6 -8 and then you will build up your supply and when the next one comes along you have the guide .
mark them so it is easy to find Bill - willierods.com Re: Guide and Top Assortment Recommendation?
Posted by:
Rolly Beenen
(---.cpe.net.cable.rogers.com)
Date: July 19, 2010 07:25AM
Take a good look at what there is on most of the rods you see.
I would get a set of double foot guides may be 5 of each size in alconite 12, 10 8, 7, 6, I would also get some sv guides in 16, 10 , 8, 7, 6 . Also get a variety of tip tops in Alconite. Mostly. a size 6 ring with tubes from 5 to 7 inclusive. The whole pile should not cost you more then 75-80 bucks. Which you should be able to recoup quickly at $7 to $10 an repair. Rolly Beenen Rovic Custom Rods Sorry, only registered users may post in this forum.
|