SPONSORS
2024 ICRBE EXPO |
how long is polit drill bits
Posted by:
Anonymous User
(---.dhcp.stpt.wi.charter.com)
Date: July 08, 2010 10:07PM
I curious flex coat pliot drill bits, how long is it well see on youtube they has like 16" long bit for reseve to drill a long cork want to curious was plan to place a order in few week
Josh Re: how long is polit drill bits
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 09, 2010 06:57AM Re: how long is polit drill bits
Posted by:
Tom Loew
(---.cdrr.qwest.net)
Date: July 09, 2010 08:03AM
my bits are 6 3/16" long
Tom Re: how long is polit drill bits
Posted by:
Tom Kirkman
(Moderator)
Date: July 09, 2010 08:35AM
The long ones are the reverse pilot bits for boring cork cylinders. They work like a charm and cut clean, smooth bores in a matter of seconds. You can make them as long as you like. The longest spade bits I have found are about 14 inches long. You're working off the back of the blade and the shank is the pilot. The bit will need to be longer than any cylinder you intend to bore.
............... Sorry, only registered users may post in this forum.
|