I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

SYNCORK
Posted by: Anonymous User (---.dhcp.stpt.wi.charter.com)
Date: May 31, 2010 11:38PM

I'M BEEN LOOKING FOR A SYNCORK HANDLE FOR MY ST. CROIX ROD AND ANY STORE SELL ANY SNYCORK ??, I'M TRYING TO BUILDINT A NICE SPINNING ROD FOR SMALLMOUTH BASS.. BUT NOT SURE IF U KNOW IF SYNCORK SELL ANYWHERE IAT ROD BILDING STORE
tHANKS jOSH

Options: ReplyQuote
Re: SYNCORK
Posted by: Jim Rippe (---.chcgilgm.dynamic.covad.net)
Date: May 31, 2010 11:58PM

Check your email

Options: ReplyQuote
Re: SYNCORK
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: June 01, 2010 12:14AM

[www.thornebros.com]

Roger Wilson

Options: ReplyQuote
Re: SYNCORK
Posted by: Bill Stevens (---.br.br.cox.net)
Date: June 01, 2010 09:58PM

Josh be very careful - many are waiting for you!

Click on this link:

[www.rodbuilding.org]

Options: ReplyQuote
Re: SYNCORK
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 02, 2010 10:05AM

take a look at these, if you can cut them in 1 1/2" strips : [www.google.com]

Bill - willierods.com

Options: ReplyQuote
Re: SYNCORK
Posted by: Anonymous User (---.dhcp.stpt.wi.charter.com)
Date: June 02, 2010 11:20PM

nice yoga cork block but only have 9 " long not any make longer block like 12" or somethings like that ?
Josh

Options: ReplyQuote
Re: SYNCORK
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 03, 2010 12:31AM

If you put two sections together tight enough you should not see any mark. I have done this with two cork handles and could not see the seam. using a threaded rod washers and wing nuts.

Bill - willierods.com



Edited 1 time(s). Last edit at 06/03/2010 12:32AM by bill boettcher.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster