I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Ardent Spinning Reel dimensions
Posted by: Walt Natzke (12.22.21.---)
Date: April 21, 2010 11:56PM

Does anyone have the spool diameter and distance from foot to center of spool for an Ardent S2500 Spinning reel? The specs do not exist on the company website.
I'm doing a re-guide job for a customer and want to lay out the NGC, but his reel is in the shop.

I usually build fly rods and this will be my first attempt at the NGC. Any tips I need to know other than those found in the RodBuilder article (which I have)?

Thanks,

Walt Natzke
Ripon, CA

Options: ReplyQuote
Re: Ardent Spinning Reel dimensions
Posted by: Jon Bial (209.34.156.---)
Date: April 23, 2010 08:49PM

It's about 3 1/8" from pin to foot and the spool is about 1 3/4" diameter.

Jon

Options: ReplyQuote
Re: Ardent Spinning Reel dimensions
Posted by: Walt Natzke (---.dhcp.trlk.ca.charter.com)
Date: April 24, 2010 02:35AM

Jon, YOU are the MAN. Thanks so much...now to get guides ordered!

Walt Natzke
Ripon, CA

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster