SPONSORS
2024 ICRBE EXPO |
Rod wrapper help.
Posted by:
Tom Nair
(---.ptldor.fios.verizon.net)
Date: April 05, 2010 12:06AM
I am building a rod jig in the spirit of the Flex coat wooden 7ft manual wrapper. My question is how do they mount the wheels to the uprights. I see no screws on the back side. I have been fumbling around with little l brackets but would like something more professional. The first wrapper I built worked fine but I want to get away from the felt and all. Thanks for any help. Re: Rod wrapper help.
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: April 05, 2010 05:26AM
I just used bolts to fit with delrin washers as spacers, Sorry, only registered users may post in this forum.
|