SPONSORS
2024 ICRBE EXPO |
Custom EVA Grips
Posted by:
Isaiah Bumagat
(---.hsd1.or.comcast.net)
Date: March 11, 2010 09:27PM
What kind of glue can you use to make custom inlays on EVA grips, or even what kind of glue is used to piece togather eva material? Re: Custom EVA Grips
Posted by:
J.B. Hunt
(---.ppoe.dsl.logantele.com)
Date: March 11, 2010 09:48PM
Weldwood Contact Cement. J.B.Hunt Bowling Green, KY Re: Custom EVA Grips
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: March 11, 2010 10:41PM
Make sure it is the red can. But there is a gel and original. Get the original. I grabbed the gel by mistake used it but alot thicker. Re: Custom EVA Grips
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 12, 2010 01:10AM
Lots of EVA grip qustions of late. Motivation to get my Decorative Grips book going - people are in for a treat whenever I get it done. Re: Custom EVA Grips
Posted by:
Isaiah Bumagat
(---.hsd1.or.comcast.net)
Date: March 12, 2010 01:15AM
Billy going to the NERBs site was my motivation. Im finding the hardest part is to get a clean cut so the joining peices look seemless, any tips? Re: Custom EVA Grips
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 12, 2010 02:47AM
What exactly are you doing? Simpel trim rings, inlays, etc? Surfaces joined must be smooth, and you must press them together SUPER hard. There is a detailed article on working with EVA in Rodmaker mag, it gives a strong foundation which is neccesary to get good results. Re: Custom EVA Grips
Posted by:
Tom Kirkman
(Moderator)
Date: March 12, 2010 08:16AM
RodMaker Volume 7 #3.
........... Re: Custom EVA Grips
Posted by:
Isaiah Bumagat
(---.hsd1.or.comcast.net)
Date: March 15, 2010 11:23PM
Any other resources on building custom EVA grps available online, beside Rod Maker? Sorry, only registered users may post in this forum.
|