SPONSORS
2024 ICRBE EXPO |
materials for making carbon fiber handle
Posted by:
Steve Bro
(---.automatededm.com)
Date: December 02, 2009 02:01PM
I have been wanting to try making a carbon fiber handle for some time, I'd like to order the materials needed to build one. I'd like to use one of the sponsors. Maybe I missed a link, but was not able to find the materials on any of the web sites. I have the rod maker issue that covers the building process, and I'm sure Tom had listed sponsors that stocked these items, but I don't have the issue with me at this time.
Thanks in advance, Steve Re: materials for making carbon fiber handle
Posted by:
Steve Chontos
(---.delta.com)
Date: December 02, 2009 02:11PM
I have been getting my supplies from Riley Rods and have been very satisfied. Give them a call, they will help you out.
Caution, making these handles can be very addiciting!!! Steve Re: materials for making carbon fiber handle
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: December 02, 2009 02:47PM
Steve,
we have the tubing in two sizes, with eva trim pieces and butt caps to go with each. [www.mudhole.com] Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Edited 1 time(s). Last edit at 12/02/2009 03:04PM by Todd Vivian. Re: materials for making carbon fiber handle
Posted by:
Barry Kneller
(---.)
Date: December 02, 2009 03:42PM
I think he's talking about the skins for making free form carbon handles rather than tubes for use as straight handles. Re: materials for making carbon fiber handle
Posted by:
Phil Erickson
(---.dsl.sfldmi.sbcglobal.net)
Date: December 02, 2009 07:55PM
As above, Riley Rods on the left is a very good source for both the products and information on the building process. Re: materials for making carbon fiber handle
Posted by:
Steve Bro
(---.mpls.qwest.net)
Date: December 02, 2009 10:52PM
Thanks for the advice, Riley Rods it will be.
Steve Sorry, only registered users may post in this forum.
|