SPONSORS
2024 ICRBE EXPO |
top 1/2 of 13' lamiglas
Posted by:
Anonymous User
(---.dyn.optonline.net)
Date: October 19, 2009 08:59PM
I have a 13' lamiglas I bought on @#$%&. I don't see a problem with building a conventional with the top 1/2. seems like it's going to be nice rod. will this work? Re: top 1/2 of 13' lamiglas
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: October 19, 2009 10:44PM
I am not certain what your question is. Do you want to know if you can use the top half of the blank and use it to build a rod? Conventional what? Spining? baistcaster?
If that is what your asking yes you should be able to use the top half of the blank to build a rod knowing that it will be probably an ultra light as there will not be a whole lot of back bone to the top half. Rolly Beenen Rovic Custom Rods Re: top 1/2 of 13' lamiglas
Posted by:
Anonymous User
(---.dyn.optonline.net)
Date: October 19, 2009 10:53PM
sorry, it's a med heavy 6' 10" 21.22 mm butt, tip is # 12, 4.58 mm baitcaster Edited 1 time(s). Last edit at 10/19/2009 10:54PM by michael pellegrino. Re: top 1/2 of 13' lamiglas
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: October 19, 2009 11:29PM
Sorry I was thinking 13' Float rod. But yes you should be able to make a rod with the top half of the blank. Rolly Beenen Rovic Custom Rods Re: top 1/2 of 13' lamiglas
Posted by:
Anonymous User
(---.dyn.optonline.net)
Date: October 19, 2009 11:34PM
what's a float rod ? Re: top 1/2 of 13' lamiglas
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: October 20, 2009 02:10AM
XSH 156 3LL
13' 3 piece 4-8 line 1/8-3/8 lure 0.558 Butt 5 Tip 3 1/8 XSH 156 3L 13' 3 piece 6-10 line 1/4-1/2 lure 0.610 Butt 5 Tip 4 5/16 A 13' rod light action used to fish for steelhead and or salmon using a float ( thin bobber) and light line. The parabolic bend of the blank act as a shock absorber allowing the use of light lines and leaders. the above comes from the lamiglas site. Rolly Beenen Rovic Custom Rods Sorry, only registered users may post in this forum.
|