SPONSORS
2024 ICRBE EXPO |
reel seat help
Posted by:
Mitch Leppelmeier
(207.58.240.---)
Date: October 09, 2009 10:13AM
so i put together a reel seat last night.... camo size 17 from mudhole.... this morning i realized that the threaded tube isnt lined up correctly :( i put it together with rod bond. my question is.... is there anyway to realign the tube or am i stuck? i wasnt sure if i could heat the rod bond hot enough to get it to spin. just figured id ask before i start to experiment. Re: reel seat help
Posted by:
Tom Kirkman
(Moderator)
Date: October 09, 2009 11:30AM
You may be able to get it loose with some heat this close in time, but remember that Rod Bond isn't hot melt glue - once you get the pieces loose with heat they won't necessarily re-set as they cool. You may end up with a weak bond.
Your best bet is probably to try and get the pieces apart, clean off the adhesive and start over. ............ Sorry, only registered users may post in this forum.
|