SPONSORS
2024 ICRBE EXPO |
Re: Rumor - Part 2
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: October 04, 2009 08:20PM
I can not believe the price of the guide wraps. Most rod manufactures pay their workers by the wrap from 10 cents to 20 cents a guide depending on the wrap. In any case their workers are paid by the wrap Good Wraps Bob Re: Rumor - Part 2
Posted by:
Andrew Metzger
(---.afspc.af.mil)
Date: October 05, 2009 09:29AM
I can see how they can re-wrap them cheap enough. I took a kistler rod down for a micro build last week and their finish dos not adhere to the blank at all, it all peels off very, very easily, down to blank in a touch over 30 minutes, re-wrapped in a bit over an hour and a half and I'm in-experienced. BTW, Alex, how long has this been rumored that North Fork was going to be making blanks for them? Re: Rumor - Part 2
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: October 05, 2009 10:36AM
It's posted on their website for the Sept newsletter or whatever it's called... a simple google search for "Kistler North Fork" will yield results for the page.
I had heard about it as early as the beginning of Sept. Check their forum board for info regarding the rewraps. ----------------- AD Re: Rumor - Part 2
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: October 05, 2009 04:56PM
The pay "per wrap" info is NOT accurate. The major manufactures I know pay their employees by the hour, not by piece. In fact in many states it is not legal. My references are: Sage, Winston, St. Croix and a few others. Re: Rumor - Part 2
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: October 05, 2009 07:21PM
Phil,
Almost all of the rod companies (including the BIG ones), employ "outwrappers" who pick up the rods at the plant, take them home, wrap the guides and return them, in addition to their own employees. They are not employees, but "contractors" and are paid by the guide or number of "starts" on their wrapper. All supplies and spacing is provided.and finish is applied at the factory, not by the out wrappers. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Sorry, only registered users may post in this forum.
|