SPONSORS
2024 ICRBE EXPO |
Looking for a blank
Posted by:
Tom Carter
(---.proxy.aol.com)
Date: August 17, 2009 12:47PM
Hi guys, I am looking for a blank that will meet a customers needs. He is looking for an 8' MH or H able to throw 1-4 ounces or close to it as light as possible (preferabally a butt less than .750) 1 piece, sensitive enough for Tog all for around $70
I have looked at the rainshadow SW967 and that meets most needs. It is only a medium 15-25 lb that throws 3/4 to 4 ounces. I am just not sure how that blank would hold up to a 30 inch rockfish, or 25 inch sheepshead. If it would hold up this would be the perfect blank. Anyone use one before? The other one I am looking at is a Mudhole crb Lamiglas GIS80H Hvy Bait, SB 8' 1 20-40 lb. 1 - 6 oz. Mod/Fast .8 8 5 3/8 oz This is for casting lures for hours so weight is a big issue, Do you think the lamiglas blank would do the trick even with a butt end of .8 and a weight of 5 3/8 oz? I was hoping for something less than 4 ounces. I also found a castaway blank 7'6" Length Line # 15 - 30 Lure Oz. - 1/2 - 2 1/2 PWR - XH Action - Mod Butt Dia. - 0.618 Tip - 6.5 Wt. Oz. - 3.1 I dont know anything about castaway blanks though. Anyone have any suggestions??? Re: Looking for a blank
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: August 17, 2009 01:37PM
You (customer) will have NO problem with the Rainshadow. I've built several of them that get used in the inlets in Ocean City Maryland and Lewes Delaware for tog, stripers, blues, sheepshead. The customer only needs to remember to set the drag correctly - the rod itself will hold up. Re: Looking for a blank
Posted by:
Tom Carter
(---.proxy.aol.com)
Date: August 17, 2009 01:41PM
Thanks Ken. That is exactly where this rod will be fished! I just wanted to make sure it would hold up well. By the way ken, Great DVD! Helped me alot! Re: Looking for a blank
Posted by:
Mike Winkler
(---.samuelmanutech.com)
Date: August 17, 2009 01:43PM
I have built on Castaway. Very good blanks. Contact the guys at Swampland and tell them what you are looking for. There customer service is awesome!!! Re: Looking for a blank
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: August 17, 2009 02:06PM
Thanks Tom - I'm glad it was helpful. Your customer is going to love that rod in the inlets. I have one myself that I use in Kent Narrows in the fall - specifically for 25-33 inch striped bass in fast water (bottom bouncing bucktails) - works great. It has enough "tip" to feel the pickup and more than enough backbone to turn the fish around. Re: Looking for a blank
Posted by:
Karry Batson
(---.olympus.net)
Date: August 17, 2009 02:48PM
The SW967 has so many uses it would take all day to list them and one of my favorites for bottom fishing Ling Cod,King Salmon and Albacore. Here are some Batson Component listing for you to consider as well. Karry
Rod Blank Model # SW967 Butt cap: EVABC20 Front Cap: Rear Grip: WHGRY-12 USE WITH wbbc AND wbec AND 3X whka 12 inch Carbon Handle Arbor: Reel Seat: TRI-AH18M-TC/PG Alps Triangle Aluminum Seat Reel Seat Shim Foregrip: FG5A-400 5 inch Cork Winding Check: BWC13 Hookeeper: TCHKL Tip Top XTCPPZT08R07.5 1st guide from tip top XTCXNZG08 SS316 Alps XN PVD without Chrome 2nd guide from tip top XTCXNZG08 3rd guide from tip top XTCXNZG08 4th guide from tip top XTCXNZG08 5th guide from tip top: XTCXNZG08 6th guide from tip top: XTCXNZG10 7th guide from tip top: XTCXNZG10 8th guide from tip top: XTCXNZG12 9th guide from tip top: XTCXNZG16 : Guide spacing Specs(inches from tip, center ring over mark) 3.5-7.5-12-17-23-30-38-47-58 Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Looking for a blank
Posted by:
Tom Carter
(---.isp.comcastbusiness.net)
Date: August 17, 2009 04:00PM
This is Going to be a spinning rod Karry, Have a good recipe for that? Re: Looking for a blank
Posted by:
Karry Batson
(---.olympus.net)
Date: August 18, 2009 02:34PM
Recipe for spin :)
Rod Blank Model # SW967F Rainshadow 8 foot 15-25 3/4-4oz 4.26 blank weight Graphite/glass composite Butt cap: BC19A Front Cap: Rear Grip: BS12-625 12" Eva Handle Arbor: Reel Seat: TRI-AH18-TC/PG Alps Tringular Seat TC/PG color Reel Seat Shim Foregrip: BSF6-500 6 inch Eva Winding Check: BWC13 Hookeeper: TCHKL Tip Top XTCPPCT08R07.5 Alps SS316 RRD Top 1st guide from tip top XPTCVDTCG08 Alps SS316 RRD High frame Tich plated with Tich plated Zirconium ring 2nd guide from tip top XPTCVDTCG08 3rd guide from tip top XPTCVDTCG10 4th guide from tip top XPTCVDTCG10 5th guide from tip top: XPTCVDTCG12 6th guide from tip top: XPTCVDTCG16 7th guide from tip top: XPTCVDTCG20 8th guide from tip top: XPTCVDTCG30 Guide spacing Specs(inches from tip, center ring over mark) 4.5-9.25-14.25-21-28-37-47-59 Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Sorry, only registered users may post in this forum.
|