SPONSORS
2024 ICRBE EXPO |
fly rod blanks
Posted by:
Mike Rademacher
(---.dyn.optonline.net)
Date: July 30, 2009 12:21AM
Looking for a recommendation for reasonable priced travel fly rod (4 pcs) - medium fast action. between 7'6 and 9'. Need to find best quality i can with getting into high end pricing. these will be built as gifts so the costs are all on me. any recommends are greatly appreciated as always. Re: fly rod blanks
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: July 30, 2009 12:58AM
IMO you cannot go wrong with Batson's blanks! They have multiple qualities at various price points. Many of the sponsors at left carry their product line.
I personally fish them and build them for clients. Re: fly rod blanks
Posted by:
Walt Natzke
(---.dhcp.mghl.ca.charter.com)
Date: July 30, 2009 02:05AM
I would recommend you call Johhny at Angler's Roost. He does not have a website, but has great graphite blanks at very good prices.
His e-mail is Jksanglersroost@aol.com and his phone number is 716-565-9838 . Let him know you are from the Rod Board. Walt Re: fly rod blanks
Posted by:
Phil Brenner
(198.217.64.---)
Date: July 30, 2009 04:20AM
what about the am-tak matrix blanks. i have a couple and really like them Re: fly rod blanks
Posted by:
John Krukemeier
(---.dsl.ipltin.sbcglobal.net)
Date: July 30, 2009 10:28AM
Beulah has the best blanks that I have built on. [beulahflyrods.com] Re: fly rod blanks
Posted by:
Eugene Moore
(---.245.82.217.Dial1.StLouis1.Level3.net)
Date: July 30, 2009 09:51PM
Try the bargain cave on Cabela's website.
Under fly fishing tackle craft I've found some excellent blanks as low as $15 Many under $30 I've built on the traditionals, IM7, PT+,SLI. Also have the Fenwick HMG at reasonable prices. Haven't been disappointed. Re: fly rod blanks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 30, 2009 10:11PM
Like said - check out Cabala's , also mud Hole blanks. Sales and specials. Bill - willierods.com Re: fly rod blanks
Posted by:
Mike Rademacher
(---.dyn.optonline.net)
Date: July 30, 2009 11:28PM
Thanks to all for your comments - as always its very much appreciated! Sorry, only registered users may post in this forum.
|