SPONSORS
2024 ICRBE EXPO |
Loomis IMX Blanks
Posted by:
Jack Levavi
(204.212.103.---)
Date: December 06, 2002 11:42AM
Hi, all: I am a long time lurker, sometimes rodbuilder, avid fly fisher and hooked on Rodmaker Mag. Enough with the credentials, I have a question. I want to build a 9 foot 5wt. as my winter project,(not that I really need anouther trout rod) and I am intrigued by the Loomis IMX blanks. I know that Loomis brought them back after discontinuing the IMX line, and I wonder if the blank has the identical action as the old IMX's. Alternatively, I was thinking about the St. Croix SC IV which I've heard so many good thinds about. Any opinions would be appreciated, Thanks. Re: Loomis IMX Blanks
Posted by:
Stan Grace
(---.dial.mt.net)
Date: December 06, 2002 01:16PM
Jack I too would be interested in hearing from anyone that has had an opportunity to compare the three piece "Slate" IMX blanks with the earlier two piece IMX models. I have put together a 9', 6# on the new blank but don't have access to a earlier 6# for comparison purposes. My all time favorite IMX is a 9', 3# but unfortunately they don't provide this blank in the "Slate" lineup. Sorry, only registered users may post in this forum.
|