SPONSORS
2024 ICRBE EXPO |
Tip Top size ?
Posted by:
Larry Richards
(---.proxy.aol.com)
Date: September 28, 2001 08:05PM
My rod blank is .065 1/2 inch from the tip.What size tip top do I need?3.5 or 4.0 ? Re: Tip Top size ?
Posted by:
Ray
(---.proxy.aol.com)
Date: September 28, 2001 08:51PM
Sounds like a 4 to me. 4/64's is .0625. Re: Tip Top size ?
Posted by:
Jim
(---.icehouse.net)
Date: September 28, 2001 08:55PM
.0625 is 4/64, you probably need a 4.5 tip. Don't try to force too small a tip on blank, and don't scrape or sand tip to make it fit, recipe for disaster. Good Luck!! Re: Tip Top size ?
Posted by:
Ray
(---.proxy.aol.com)
Date: September 28, 2001 09:03PM
I think you could safely scrape the finish off, but you don't want to sand or file the blank itself. Good point. Re: Tip Top size ?
Posted by:
Billy 40
(---.dynamic.ziplink.net)
Date: September 28, 2001 09:49PM
For now, order both & see which fits - add to that order a tip-top gauge. Billy Sorry, only registered users may post in this forum.
|