I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Ozark Rod Makers School September class is full
Posted by: Harry Boyd (---.mob.bellsouth.net)
Date: July 02, 2009 09:19AM

Hi Folks,

Response has been great to our class offerings. Our September 14-19 class is completely full, and we appreciate the great interest. Because response has been so good, we're opening another class November 16-21. If you're interested, let us know soon since this class is likely to fill quickly as well.

In addition to classes already mentioned here, Bob Nunley and I are offering two additional classes scheduled around the Southern (Bamboo) Rodmakers Gathering (SRG) to be held in Mountain Home, Arkansas on October 22-24. First, a few days before SRG, from October 19-21, we will host a bamboo blank making class. We'll make a two piece, single tipped bamboo blank for $995 and will also pay your registration fees to the SRG. Six spaces are available.

Following SRG on October 26-28, we'll host another class that we believe to be the first of its kind. We're calling it "Bamboo Rod Making 201." In the 201 class we'll cover some topics that are beyond the basics of bamboo rod making. The specific curriculum will be designed to meet the needs of the participants. Possible areas of instruction include Taper Design, Advanced Wrapping techniques, Turning Reel Seats and Cork Grips, Installing Stepped Ferrules, Pinning Ferrules, Polishing Varnish and many more. Four spots are still open.

A third class we are offering focuses on restoring older bamboo rods. Contact me or Bob for further information on any of these classes. Our contact information can be found through the www.bamboorodschool link below.

Harry

Harry Boyd

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster