SPONSORS
2024 ICRBE EXPO |
Water Slide Decal / Color Preserver !
Posted by:
Tom Loucks
(---.proxy.aol.com)
Date: May 05, 2009 11:19PM
Gentlemen:
Getting ready to install a Decal Connection water slide decal and I will be using their Micro Set. Should I coat the decal with color preserver or just epoxe over the decal? What do you guys do? Thanks again for your help. Tom Re: Water Slide Decal / Color Preserver !
Posted by:
Sam Stoner
(---.dhcp.spbg.sc.charter.com)
Date: May 05, 2009 11:48PM
I would recommend a coat of CP. The decal material may not react well to some brands of epoxy finishes. The CP will seal in the decal material and may give it a tad more visual depth. Allow plenty of time for the CP to dry before applying your finish. Re: Water Slide Decal / Color Preserver !
Posted by:
Chris Davis
(---.knology.net)
Date: May 06, 2009 12:15AM
Tom-
Sam's method obviously works for him. All I use is waterslides from Dec. Conn. and I have never used CP over one. I haven't used all the different brandsof epoxy but the ones I have used cover fine for me. The folks at D. Connection are the ones to ask. Chris Re: Water Slide Decal / Color Preserver !
Posted by:
Brian Morrow
(---.neo.res.rr.com)
Date: May 06, 2009 02:15AM
Tom,
I'm with Chris on this one. I've used the waterslides from DC for over a year now and I have never used CP on any of them. For reference I use Threadmaster Lite. Give Jimmy a call at their Tech Serv. number found on the website. If anyone can answer your decal questions it is Jimmy. Good luck! Sorry, only registered users may post in this forum.
|