SPONSORS
2024 ICRBE EXPO |
Batson Switch Rod
Posted by:
Curtis Trompler
(---.austinareaobgyn.com)
Date: January 14, 2009 05:32PM
I got a good deal on the 7 wt Batson Switch Rod Blank. However, I'm realizing that this is going to be very different from any of the rods I have built so far. What guide spacing and sizes do you recommend, considering that they might need to pass looped shooting head connections? Would single foot guides be OK, or do I need to go with doubles? What size and shape grips should I use? I was planning to make the grips myself. Re: Batson Switch Rod
Posted by:
Karry Batson
(---.olympus.net)
Date: January 14, 2009 06:06PM
This one works for me.
IF1087 Rainshadow RX7 Switch Rod Component Part Number Part Description Rod Blank Model # IF1087-4M 10'8" 4pc 7wt Switch Rod Blank - Matte Clear Butt cap: SWHDCCBC20F Switch Grip Hard Density Cork Composite Butt Cap with Flare Reel Seat: RYSW-SG Y Fly Seat with Black Aluminum Insert with Butt Cap & Trim Ring - Shiney Gunsmoke Reel Seat Shim: n/a Rear Grip: SW325S-300 3.25" Rear Switch Grip Super Grade ID .300" Fore Grip: SW1175S-300 11.75" Fore Switch Grip Super Grade ID .300" Winding Check: LTCWC365 Lt TitCar Plated Winding Check .365" I.D. Hookeeper: FHK-TC Folding Hook Keeper-Tich Tip Top XTCFTL5.0 ALPS SS316-Titanium Carbide Pltd Fly Top Large Loop 5.0 Tube Guides (see below for size and quantity) XTCSNGP ALPS SS316-Snake Guide - TICH w/o Chrome Guides (see below for size and quantity) XTCLXNZG ALPS SS316-LXN Guide w/'Z' Ring - TiCh w/o chrome Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XTCSNGP2 4" 2nd XTCSNGP2 9.375" 3rd XTCSNGP2 15.5" 4th XTCSNGP2 22.75" 5th XTCSNGP3 31" 6th XTCSNGP3 40.5" 7th XTCSNGP4 51.25" 8th XTCSNGP5 63.75" 9th XTCLXNZG12 78" 10th XTCLXNZG16 94.25" Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Sorry, only registered users may post in this forum.
|