SPONSORS
2024 ICRBE EXPO |
decal
Posted by:
Chad Rivers
(---.sip.clt.bellsouth.net)
Date: December 19, 2008 07:35AM
I haven't put a decal on a rod yet but I want to put one of the rod I am building now. Is the Lamiglas decal that comes with the blank a waterslide? It looks like there is some perforation around the decal which made me think it was a peel and stick but it didn't seem to come off. I didn't try too hard because I didn't want to damage it. Thought I would ask the experts first before I screw up........again. Re: decal
Posted by:
Backlash Tools
(---.hsd1.ga.comcast.net)
Date: December 19, 2008 10:00AM
Chances are that it is a peel n stick I know who and has made them.
And that is a definitely maybe Jimi You can emaile me at jimi@backlashtools.com for further info Lynn Williams Backlash Tools [www.backlashtools.com] Re: decal
Posted by:
Anonymous User
(---.ptld.qwest.net)
Date: December 19, 2008 12:05PM
Unless they have changed lately it is a water slide.
I have never had a peel and stick from Lamiglas. The perforations your seeing are from the die cut machine. You can always email Lamiglas and ask them. Re: decal
Posted by:
Chad Rivers
(---.sip.clt.bellsouth.net)
Date: December 19, 2008 03:56PM
Thanks Tim. I was thinking it was a water slide but I have never messed with them and was not sure. Re: decal
Posted by:
Walt Davenport
(---.client.stsn.net)
Date: December 19, 2008 07:12PM
I just added a Lamiglas decal to a rod and the one they sent with that rod was a peel and stick; the decal was gold color, had the lamiglas logo , and under that "fish with confidence" Walt Davenport "Roadhouse Rods" Re: decal
Posted by:
Robert Russell
(---.cable.mindspring.com)
Date: December 19, 2008 08:14PM
I bought 4 or 5 from Mudhole recently on their close out and all were peel and stick. Re: decal
Posted by:
Robert Balcombe
(207.118.61.---)
Date: December 19, 2008 09:45PM
Chad call Kindra at Lamiglas. I got a couple from them a few months back and they were water slides
Good wraps bob Re: decal
Posted by:
Jim Creed
(---.int.bellsouth.net)
Date: December 19, 2008 10:39PM
go to decal connection and read the instructions for peel and stick, I got lucky and mine turned out ok, I did not know how lucky till I read the directions. Re: decal
Posted by:
Jim Gamble
(---.187-72.tampabay.res.rr.com)
Date: December 20, 2008 06:28AM
Lamiglas has ALL of the above mentioned ... peel n stick, waterslide AND the "invisible label".
Over the years, they have run the gamut. There is NO telling what you have without seeing it. For the most part, if it is a small sticker that ONLY says "Lamiglas" with the slogan ... waterslide. For the most part, if it is a big sticker with rod specifications too ... peel n stick. MOST of my blanks, over time, have come with the "invisible label" (meaning, none). Regardless of what they come with, I don't use them. My personal preference is to call Debbie at Decal Connection and have one made specifically for me ... with my name and the technical data desired. Sorry, only registered users may post in this forum.
|