I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Tom, Post
Posted by: Bob Balcombe (---.dyn.centurytel.net)
Date: December 18, 2008 07:45PM

What about I use a new name with the same Pass word
Good Wraps Bob

Options: ReplyQuote
Re: Tom, Post
Posted by: Bill Eshelman (---.neo.res.rr.com)
Date: December 18, 2008 08:07PM

Bob,
What ever you do, DO NOT use my name!! I have tried every variation and mis spelling I can think of and I can`t get in either.

keep asking how and then i might not have too. lol!!
Bill

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote
Re: Tom, Post
Posted by: Tom Kirkman (Moderator)
Date: December 18, 2008 09:19PM

You're both "in."

...........

Options: ReplyQuote
Re: Tom, Post
Posted by: Bob Balcombe (---.152.6.223.Dial1.Atlanta1.Level3.net)
Date: December 18, 2008 09:24PM

test

Options: ReplyQuote
Re: Tom, Post
Posted by: Tim Lombardi (---.dsl.skt2ca.sbcglobal.net)
Date: December 19, 2008 01:08PM

Tom I could view the photos up to now but now it says i have to register to view them am i out or was i ever in.


Thanks

Options: ReplyQuote
Re: Tom, Post
Posted by: Tom Kirkman (Moderator)
Date: December 19, 2008 02:15PM

You're registered as Tim Lombardi

I have no idea what password you chose when you registered. You can request a new one if you can't remember it.

..............

Options: ReplyQuote
Re: Tom, Post
Posted by: Mike Barkley (---.try.wideopenwest.com)
Date: December 19, 2008 03:53PM

If you're registered, just look at the red bar at the top and see if the LOG IN button is visible. The message is misleading because it does NOT say you aren't registered, it simply says that you must be registered to access/view!! You may be already registerd but not logged in. A good cure for that is to never log out!!

Mike (Southgate, MI)
If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster