SPONSORS
2024 ICRBE EXPO |
Black/ yellow Classic twist thread
Posted by:
Eddie Anderson
(---.tampfl.dsl-w.verizon.net)
Date: September 26, 2008 05:32PM
Hi all, I am doing a rod repair on a rod with Black and yellow classic twist thread. Do any of you know were I can get this twist color?
i ment Black and yellow. I'd rather be catching! Edited 1 time(s). Last edit at 09/26/2008 10:46PM by Eddie Anderson. Re: Black/ white Classic twist thread
Posted by:
John V. Holohan
(---.hsd1.pa.comcast.net)
Date: September 26, 2008 08:43PM
The only place I could find the spool I have was on #Bay, so I just did an #Bay check and couldn't find any classic b/w. However, I did see this:
[] (right click on the link, select copy shortcut, then paste in the address bar) BTW, no affiliation w/seller. It's tough to tell if it would match, but it does look pretty good. Good luck. John Edited 1 time(s). Last edit at 09/26/2008 08:46PM by John V. Holohan. Re: Black/ white Classic twist thread
Posted by:
John V. Holohan
(---.hsd1.pa.comcast.net)
Date: September 27, 2008 02:18AM
OK, black and YELLOW! Again, #Bay (Rice's brand not Gudebrod): []
Although not "classic," try this: [www.anglersworkshop.com] I think Fishhawk makes this for Angler's Workshop. John Edited 1 time(s). Last edit at 09/27/2008 02:21AM by John V. Holohan. Re: Black/ white Classic twist thread
Posted by:
bill boettcher
(---.250.150.178.Dial1.Weehawken1.Level3.net)
Date: September 27, 2008 09:46AM
You can also get yellow and put marks on it with black permanent marker. May take a little experimenting. Re: Black/ white Classic twist thread
Posted by:
Eddie Anderson
(---.tampfl.dsl-w.verizon.net)
Date: September 27, 2008 06:06PM
Thanks guys, I have my answer. I'd rather be catching! Re: Black/ yellow Classic twist thread
Posted by:
David Dosser
(---.columbus.res.rr.com)
Date: October 01, 2008 07:09PM
Marker idea is a really good idea. Just make sure your hands aren't shaking when you do it.
David Sorry, only registered users may post in this forum.
|