I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Wonder Weaver
Posted by: Chris Beverley (218.185.73.---)
Date: June 05, 2008 08:15PM

I am considering venturing into the weaving form of thread art.

I have been looking at the Wonder Weaver looms and was wondering which one is the easiest to use.

Should I get the Wonder Weaver or the Wonder Weaver II. I am not fussed about the cost and would rather spend the money to get the right tool.

Thanks
Chris



Edited 1 time(s). Last edit at 06/05/2008 08:17PM by Chris Beverley.

Options: ReplyQuote
Re: Wonder Weaver
Posted by: Jim Upton (---.lsanca.btas.verizon.net)
Date: June 05, 2008 10:41PM

There is a place for both. However, having the Wonder Weaver, will give you all the parts except the accessory "Large Bore Hub" All the other parts are interchangeable. The Wonder Weaver with it's traveling third wheel controls long strands of metallic thread much better than the two wheel version. Where cost is an issue the WW II is substantially less. If you have specific questions send me E-Mail and I will try to answer them.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster