SPONSORS
2024 ICRBE EXPO |
RODBOND, NEW--
Posted by:
Ralph O'Quinn
(---.wavecable.com)
Date: February 18, 2008 01:56PM
Greetings to all
The big event is about upon us. I will be leaving for Hi-Point this coming thursday, merely 3 days hence. I wish to announce that we will have at the Trondak booth our new 10min. Rod Bond. It has a working time of 10 minutes at 75 deg. F. I managed to whomp up a large lab batch and packaged it (by hand yet) in miscellaneous jars laying around just waiting to be used for something like this occassion. Ask for a demonstration and I or Dan will be glad to oblige. We have a very limited number of samples and I guess its first come first served. We have already sent out samples to various distributors etc. We have not yet mixed a production batch, as the formula was not pegged in time to get production quantity raw materiels before the show. Dan can give you information as to when our first production batch will be ready for shipment. Also we will have a sufficient quantity of finishing spatula's at the booth. Last year we ran out about the first hour after the show opening. That spatula has become so popular that we intend to include it in the catalogue at the next revision. Hope to see all of you at the show Ralph Re: RODBOND, NEW--
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: February 18, 2008 02:21PM
Hi Ralph! Good to see your post on the new product. I am quite sure you will be happy to know that there will be no "Flocking Bluebeard" event held this year! Looking forward to seeing you again. If you still have it please return my cherished "Ralphees Liquid Thread" dispenser.
Bill Re: RODBOND, NEW--
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: February 18, 2008 03:26PM
THANK YOU SIR!!! I guess that the 30 minutes I spent begging for the product last year DID pay off indeed ... YEAH! I can barely wait to spend a few minutes with Dan again AND to check out this latest product.
1) Did you color it uniquely as we discussed? 2) Can it be used on tip-tops and removed via reasonable heat application? Thanks again! Re: RODBOND, NEW--
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: February 18, 2008 03:49PM
Super! I hope I get to you in time for a sample!!!!! Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: RODBOND, NEW--
Posted by:
Harv Gorton
(---.pm3-13.pit-ch.pa.localnet.com)
Date: February 18, 2008 04:38PM
Ralph,
I use Rod Bond for repairing the wood in my pindecks in our bowling center. Dang tuff stuff ! It takes the riggers of balls & pins pounding it, without chipping out. If the faster glue is as tough, it;ll be GREAT ! Re: RODBOND, NEW--
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: February 19, 2008 03:49AM
Ralph are you going to the Woodland show? I hope to see you there
Good Wraps Bob Sorry, only registered users may post in this forum.
|