SPONSORS
2024 ICRBE EXPO |
spiral on 2 piece rod
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: December 20, 2007 09:00AM
Laying out guides on 2 piece rod for spiral. The question is do all the guides on the top piece have to be 180 from reel? I think It will work both ways. But have concern about one guide on top that might not be 180 . The next one will. There are 9 more guides mostly 8-6. Total length of rod is 9'6"-Thanks for info Bill Re: spiral on 2 piece rod
Posted by:
Jeff Shields
(---.static.twtelecom.net)
Date: December 20, 2007 09:24AM
Bill,
I just finished a build for my brother-in-law on an 8 foot, two piece blank that was spiral wrapped. And actually, the bumper ended up being wrapped at the ferrul location on the upper section of the blank. Don't get caught up in one-piece vs. two-piece. Just put the two pieces together and lay the guides out how they want to be layed out. There will be no ill effects due to the fact that it's a two-piece blank at all. Jeff Re: spiral on 2 piece rod
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: December 20, 2007 09:50AM
Jeff, Thanks for the quick reply. This will help-Bill Sorry, only registered users may post in this forum.
|