SPONSORS
2024 ICRBE EXPO |
threads per inch?
Posted by:
Daniel Burney
(---.224.91.75.ip.alltel.net)
Date: October 26, 2007 09:18PM
about how many threads per inch packed side by side?
gudebrod size a gudebrod size d madeira #40 polyneon Re: threads per inch?
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: October 26, 2007 10:13PM
It varies depending on wrap tension and how tight you pack them.
It only takes a minute to wrap a 1/4 in yourself, count, and multiply by 4 Raymond Adams Eventually, all things merge, and a river runs through it.. Re: threads per inch?
Posted by:
Jim Upton
(---.lsanca.dsl-w.verizon.net)
Date: October 26, 2007 10:16PM
Wrap a dowel with each size and count them. You will have to do it several times and take an average because you won't pack them the same each time and your tension may not be the same each time. Re: threads per inch?
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: October 26, 2007 10:17PM
THREAD THREAD TENSILE WRAP STRENGTH YARDS THREAD WRAP WEIGHT
SIZE DIAMETER STRENGTH PER 1 cm WIDTH * PER OUNCE PER 1 cm WIDTH * (Gudebrod brand) (millimeters) (pounds) (pounds / centimeter) (yards / ounce) (milligrams / cm) * per 1 cm wide band * per 1 cm Circumference 00 - SILK 0.125 2.0 160 - * for Blank OD = 3.2 mm 00 - REGULAR NYLON 0.113 1.8 159 - - A - REGULAR NYLON 0.175 2.7 154 950 18.6 A - NCP 0.175 2.2 126 950 18.6 A - HT METALLIC 0.150 3.5 233 950 21.8 C - NCP 0.260 4.6 177 450 26.5 C - TRIMAR 0.260 4.5 173 - - D - REGULAR NYLON 0.260 7.4 285 450 26.5 D - NCP 0.330 5.1 155 300 31.3 D - HT METALLIC 0.260 8.0 308 350 34.1 E - REGULAR NYLON 0.330 11.6 352 300 31.3 Raymond Adams Eventually, all things merge, and a river runs through it.. Re: threads per inch?
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: October 26, 2007 10:55PM
FOr a butt wrap.... GUdebrod Nylon A is 3.75 per mm, Madeira Billy40 is 4.15 per mm Sorry, only registered users may post in this forum.
|