SPONSORS
2024 ICRBE EXPO |
Tennessee Handle Tube
Posted by:
Judd Stanislawski
(206.230.109.---)
Date: August 26, 2007 01:21PM
I have never built a handle using the graphite tube. What is best to fill the space between the tube and blank?
Thanks, Judd Re: Tennessee Handle Tube
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: August 26, 2007 01:36PM
The supplier you get the tubing from should also have graphite
and or foam arbors sized for the tubing. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Tennessee Handle Tube
Posted by:
Spencer Phipps
(65.197.242.---)
Date: August 26, 2007 02:12PM
Rainshadow has theirs in the Misc. section of their site. Re: Tennessee Handle Tube
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: August 26, 2007 02:58PM
Ray hit it dead on ... let the vendor give you a hand. Bob at Custom Tackle is VERY well informed on those types of grips and keeps a wide variety in stock, along with all the miscellaneous parts needed for assembly. We were just discussing some of the newer stuff the other day as a matter of fact. Re: Tennessee Handle Tube
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: August 26, 2007 06:52PM
Judd; just so you’re clear, there is no need to "fill the space between tube and blank". Just a need to create a couple or three contact points using arbors to secure the handle (tubing to the blank)
Custom Tackle is also who I suggest you contact. Re: Tennessee Handle Tube
Posted by:
Bill Pulk-Midwest rod and reel
(64.122.91.---)
Date: August 26, 2007 08:12PM
Hi Judd...Midwest Rod and Reel has all the parts in stock you need for a graphite handle...check the web site out Bill@midwestrodandreel.com www.midwestrodandreel.com Sorry, only registered users may post in this forum.
|