SPONSORS
2024 ICRBE EXPO |
TM lite question
Posted by:
Tim Harris
(---.stx.res.rr.com)
Date: August 19, 2007 05:49PM
Just tried it for the first time this morning. I know it has a longer working time, but is this normal? I didn't do anything different than I normaly do with the TM regular. One other thing, I didn't recieve any new syringes so I used the ones from my TM regular bottles. I wouldn't think so, but do you think that was the culprit here if something is indeed out of wack? Thanks all.
TJ Re: TM lite question
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: August 19, 2007 06:09PM
Normal compared to what?? You didn't say "what" was normal. How long has it been on? What is the room temp. It has a longer cure time if that's what you're asking. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: TM lite question
Posted by:
Andy Dear
(---.sub-66-174-93.myvzw.com)
Date: August 19, 2007 06:30PM
Tim,
I am not quite sure what you're asking, but yes, the potlife on the Lite is about 1 hour (maybe a tad more) as opposed to 25min. on the High build. You should not be using the same syringes as the PartA Resin is not the same....the hardener is the same though. Andy Dear Lamar Fishing Re: TM lite question
Posted by:
Tim Harris
(---.stx.res.rr.com)
Date: August 19, 2007 06:34PM
Sorry guys...brain fart and lack of proof reading. It has been on the rod 8 hours.
Re: TM lite question
Posted by:
jon edwards
(---.mia.bellsouth.net)
Date: August 19, 2007 07:19PM
do the threadmaster bottles come with the yorker caps instead of the syringes? or neither? Re: TM lite question
Posted by:
Andy Dear
(---.sub-66-174-93.myvzw.com)
Date: August 19, 2007 07:39PM
Same as all other epoxies....flat caps. Syringes and Yorkers are available seperately. We used to suppply them w//yorkers instead of flat caps, but everyone hated the yorkers except for about 1/2% of the builders out there. The only place people REALLY like the Yorkers is in Europe for whatever reason.
Tim, I am still confused as to what you're asking. You say the epoxy has been on the rod 8 hours.....and is it still tacky? Has it not cured? I guess I am having difficulty understanding what EXACTLY you are expierencing. Please be very specific. Andy Dear Lamar Fishing P.S. It's the weekend.....I don't answer phone calls on Saturday or Sunday. Re: TM lite question
Posted by:
jon edwards
(---.mia.bellsouth.net)
Date: August 19, 2007 07:54PM
ahh ok cause every picture i seen showed yorker caps Re: TM lite question
Posted by:
Tim Harris
(---.stx.res.rr.com)
Date: August 19, 2007 08:07PM
Andy,
I applied the finish this morning about 8:30 and checked it at 4:00 and the finish is still a little tacky. Not too bad, cause it has set up enough that I can trim any fuzzies, but just barely. Usually by this time in my experience, the regular is usually not tacky at all. Just wondering if this was normal for the lite after 8 hrs. Like I said before, I used the syringes that I use with my regular TM. I acctually swapped the caps since I have the syringes "mounted" in the caps. Maybe that is the cause? I don't mean to say that I mixed the two, but I did share the syringes. Re: TM lite question
Posted by:
Andy Dear
(---.sub-66-174-93.myvzw.com)
Date: August 19, 2007 08:22PM
That sounds pretty normal. The Lite is not tack free until about 8 hours. A safe rule of thumb is to take the High Build attributes and double them.
HB Potlife: 25 Min Lite Potlife: 1hour HB Gel Time: 1.5 hours Lite Gel Time: 3 Hours HB Tack Free: 4 Hours Lite Tack Free: 8 Hours Andy Dear Lamar Fishing Re: TM lite question
Posted by:
Tim Harris
(---.stx.res.rr.com)
Date: August 19, 2007 08:26PM
Thanks Andy,
Do you see any problems sharing the syringes without cleaning them out with alcohol? like I said, I just switched the caps from the regular to the lite. Re: TM lite question
Posted by:
Andy Dear
(---.sub-70-216-255.myvzw.com)
Date: August 19, 2007 09:41PM
Tim,
Syringes only coat about $1.00 per pair. I'd say get a seperate set to avoid contamination. Andy Dear Lamar Fishing Sorry, only registered users may post in this forum.
|