SPONSORS
2024 ICRBE EXPO |
PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Ken Driedger
(---.bchsia.telus.net)
Date: August 05, 2007 02:32PM
Hello, Andy. I did a search here, and did not see the following "murphy's law" occurance
(when something can go wrong, it will)..... What would happen if one mixed the light and the regular up? Using the wrong A with the wrong B? and vIce-versa? It's a possibility, however remote, especially if one re-decanted the formulae into other vessels. With the stuff I no longer use and because of the size of the half-gallon containers, I've run the a/b into way smaller containers here. When I contact Reaction for the light, I will use totally different containers for the regular/light, but still, the possibility is there !! Thanks in advance. Ken Driedger Smithers, BC (eh?) .... :-) Edited 3 time(s). Last edit at 08/05/2007 02:34PM by Ken Driedger. Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: August 05, 2007 02:42PM
If I remember correctly, Andy said the hardener is the same - the resin is different. So ... you can't screw up if I have this correct. Well, I guess you could mix two resins if you tried hard enough. LOL
Over and out, eh? Edited 1 time(s). Last edit at 08/05/2007 02:44PM by Jim Gamble. Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
jon edwards
(---.mia.bellsouth.net)
Date: August 05, 2007 03:21PM
and if they arent the same mix some up and try it and see what you get....might get something even better Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: August 05, 2007 05:13PM
I'm not allowed to post the secret concoction. It's amazing what a little experimenting can do for you. Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Andy Dear
(---.sub-70-196-34.myvzw.com)
Date: August 05, 2007 08:10PM
Yes...same hardener, different resin.
Andy Dear Lamar Fishing Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Ken Driedger
(---.bchsia.telus.net)
Date: August 05, 2007 09:32PM
Acknowledged, folks....I have a couple of tramp rods here, that are good lab rat candidates. According to the web page, the light is coming out in the fall, which is now mere weeks away. I have TM regular, and like the speed, but have had to modify my mixing procedures to minimize tiny micro bubbles. Or: it may be dust particles. Unsure. Blems little white/clear dots, about the same size as the period of the font of this forum.
Maybe 10-15 scattered in a 12mm wrap. Anybody else get this? Thanks for the input, RE formula compatibility.. KD Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: August 05, 2007 11:16PM
TM Lite is already available, it will most definitely cure your issues with bubbling ... the formulas are compatible, but why would you want to mix. Purchase the new stuff and you will be happy. Re: PAGING MR. DEAR: A HYPOTHETICAL ISSUE: RE: THREADMASTER
Posted by:
Ken Driedger
(---.bchsia.telus.net)
Date: August 06, 2007 02:06PM
Hi, Jim....I have an e-mail to the Canadian distributor but he'll answer it in due course. So for me, at the moment, not yet available.
I had not *planned* to mix these products, but wished pre-info in case it accidentally happened. It's happened to me before, with early products, like decapour, mirrorshine, crystal clear, nu-clear, envirotex EX-88, EX-75, flex-kote, gibbs 2-part, sun cure, and a couple of other ones I can't recall. Sorry, only registered users may post in this forum.
|