SPONSORS
2024 ICRBE EXPO |
EVA Adhesive
Posted by:
Jeff Shields
(---.static.twtelecom.net)
Date: June 26, 2007 09:54AM
Hi everyone,
I have been using U-40 Rod bond exclusively when mounting my EVA and Hypalon grips and really love it. Now I need to glue an EVA butt cap onto an EVA butt grip. Once dry, I am planning on doing a little shaping to make a smooth transition. Is U-40 still the right adhesive for the job ? I would like the transition to look (and feel) seamless. I also have Gorilla glue, Flex Coat, etc. Thanks, Jeff Re: EVA Adhesive
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: June 26, 2007 10:13AM
Rod bond will work, use it sparingly and don't get any near the eva joint and you'll be fine. If you do get some in the joint wash it out with alcohol and a brush or you'll see a glue joint. Re: EVA Adhesive
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: June 26, 2007 10:48AM
That will work but my choice for EVA to EVA is Contact Cement Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: EVA Adhesive
Posted by:
Edward D. Smith
(---.ard.bellsouth.net)
Date: June 26, 2007 10:41PM
My experience with EVA and Hypolon is best to use Contact or rubber cement!! (Both are the same animal)
Ed Smith Sorry, only registered users may post in this forum.
|