SPONSORS
2024 ICRBE EXPO |
Batson BUL5 hardware Corrosive or not?
Posted by:
Andrew Dickinson
(---.sub-66-174-79.myvzw.com)
Date: June 05, 2007 12:01AM
Hi Guys,
I'm building an 8 wt. that I just bought from Dan Craft. I realized that I only have BUL5 plated hardware for the reel seat. The insert will be acrylic but is this hardware okay for a salty environment? Bill or Kerry, what's your two cents? Thanks for any info! Andrew Re: Batson BUL5 hardware Corrosive or not?
Posted by:
Bob Balcombe
(---.ka.centurytel.net)
Date: June 05, 2007 02:32PM
Call Kerry or Bill Batson at the (RainShadow/Forecast) phone number it is a toll freee call
Good Wraps Bob Re: Batson BUL5 hardware Corrosive or not?
Posted by:
Karry Batson
(---.olympus.net)
Date: June 06, 2007 03:50PM
I would use a more agressive seat with two locking nuts for the eight weight like the RA7L2 or RA8L2 as fare as holding the reel that is. The BUL5 Seat but would not be my choice for an 8 weight. Sorry, only registered users may post in this forum.
|