SPONSORS
2024 ICRBE EXPO |
REVERSING CHEVRON'S
Posted by:
Tommy Loucks
(---.proxy.aol.com)
Date: May 06, 2007 04:56PM
I have completed a basic Chevron wrap, I sure do like the looks of the reversing Chevron. Is there a procedure or sequence of turning a basic Chevron into a reversed Chevron? Any help or input is appreciated.
TOM Re: REVERSING CHEVRON'S
Posted by:
Ellis Mendiola
(---.dsl.hstntx.swbell.net)
Date: May 06, 2007 07:36PM
Criscross your first thread and insteat of wrapping to the right on your next pass, wrap to the left. In other words, wrap the next sequence below the criscross. The point of your chevron should be pointing to the left at this point if you have your rod in the lathe with the butt to the left. Re: REVERSING CHEVRON'S
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: May 07, 2007 11:38AM
Tommy, Thanks to Dave B., there's a very helpful, easy to follow video for this wrap found at www.visualwrap.com, listed within the Pattern Library link -
[www.visualwrap.com] Re: REVERSING CHEVRON'S
Posted by:
Russ Pollack
(64.241.28.---)
Date: May 08, 2007 12:27AM
Billy's book shows this one too.
Uncle Russ Calico Creek Rods Sorry, only registered users may post in this forum.
|