SPONSORS
2024 ICRBE EXPO |
12wt reel seat size?
Posted by:
Chris Calandrelli
(---.adsl.snet.net)
Date: March 18, 2007 08:20AM
I am building a 12wt and it was suggested (by Mud Hole) I use a Pacific Bay A9 reel seat. Pac Bay suggests this seat for spey rods. It is a big reel seat with a I.D of .747 ( the bank is .5). Anyone know if this seat will be OK from a weight and balance standpoint?? Should I consider using a different seat? Thanks
Chris Re: 12wt reel seat size?
Posted by:
Chris Garrity
(---.phil.east.verizon.net)
Date: March 18, 2007 08:58AM
My guess is you'll be fine, Chris. I used a Pac Bay A8 seat on a 10 weight, and it's worked well. The A8 and A9 reel seats are very similar except for the fact that the A9 is bigger, and I think that for a 12wt using the bigger seat might be warranted.
The A9 and A8 seats are about $14 and $17 respectively, which is probably not a whole lot considering the total investment you're likely putting into a 12-weight rod. If it were me I'd buy both, and use the one that works better. At some point in the future you'll probably get a chance to use whichever one you don't pick. Re: 12wt reel seat size?
Posted by:
Michael A Taylor
(---.ec.res.rr.com)
Date: March 18, 2007 08:59AM
Try a number 16 Fuji Deluxe model DPSD. This reel seat will hold any 12 wt size fly reel tightly, will not corrode, and its light weight. You can leave the reel attached in a saltwater environment for weeks at the time and the reel seat will not freeze up. Re: 12wt reel seat size?
Posted by:
Tony Dowson
(---.ok.shawcable.net)
Date: March 19, 2007 02:34AM
Pac Bay makes a Channel Lock seat that would probably make a great choice.
Might be worth considering. Sorry, only registered users may post in this forum.
|