For a spinning rod - graphite - 9' 6" - 2pc - line range 10-20lb - lures 1-2.5oz - action Mod-Fast to Fast
Thoughts welcome

Not sure about that one, best go by mfg. suggestion, I skip from 8' to 10' rods.

Dave von Doehren
PRRODS......If man built it , man can fix it.and if man built it man can break it !

Butt extension

Lamiglas and Rainshadow build Salmon/Steelhead blanks that come close but to get the lure weight most need to be a bit longer.

Stan Grace
Helena, MT
"Our best is none too good"

Robert,
Kind of painted us in a corner with your specs. The closest I can think of is the Lamiglas GSB 114-2M, you don't see many blanks with your line specs that throw those weight specs.

check out the pac bay PBX seris in graphite
closest i can get is the

MODEL LINE WT LURE WT LENGTH PCS ACTION POWER TIP BUTT DIA. BLANK WT
X2GSSP70L 12-20 1/2-3 7’ 1 MODERATE LIGHT 4.5 0.620” 2.9

its a mod action an only 7 foot though maybe not what your looking for but worth a look

All Star BESP1087-2 if you can find it (might be impossible or near impossible)... i think that will be real close... though its listed as a 1pc in my notes, i thought it was a 2pcer.
Length:9ft
Lure Weight:3/4-2
Line Weight:12-25
Action:Fast

Now, that being said, i do have a friend that has been successful making pretty heavy spinning rods out of spey blanks by dropping a section. that may be a possibility.